A). Yes, Thermocure® - Cooling System Flush comes in a concentrated form which is added directly to the Cooling System.

A). No, a small amount of residual water in the Cooling System will not have any bearing on the effectiveness of Thermocure® - Cooling System Flush.

A). Yes, Thermocure® - Cooling System Flush will clean the entire cooling system with no adverse effects on Aluminium, Brass, Rubber, Plastic or Synthetic products used in sealing your cooling system.

A). Yes, by filling your cooling system completely you will eliminate air pockets that can restrict cleaning of these areas.

A). If the cooling system is very rusty, it may be beneficial to flush the system with water prior to adding Thermocure® - Cooling System Flush. However, the cooling system does not need to be clean before trating with Thermocure® - Cooling System Flush.Q). Can I Use Thermocure® - Cooling System Flush more than once?

A). Yes, Thermocure® - Cooling System Flush will keep working until completely saturated with Iron. Depending on how severely the cooling system has been corrupted, Thermocure® - Cooling System Flush should be able to service several vehicles with the same product.

A). We recommend 8-10 hours of normal use if possible. If the vehicle cannot be driven, run engine intermittently over several days to circulate Thermocure® - Cooling System Flush through the entire system.

A). Drain Thermocure® - Cooling System Flush from your cooling system and flush with fresh water. Refill your cooling system with water and high quality coolant to the Manufacturers specifications.

A). As Cooling Systems are under a lot more strain during summer, it is recommended your cooling system be serviced before extreme summer temperatures are experienced. Thermocure® - Cooling System Flush should not be used in sub-zero temperatures.