Evapo-Rust - Australia   - Ph: 1-800-014685 - Email: info@evapo-rust.com.au

Cooling System Flush Header

"Automotive Cooling System De-Rusting Agent"

Removes even deep rust, rust scale and calcium deposits from entire cooling system


Non-Toxic, Non-Corrosive, Non-Flammable

Will not clog or harm engines

Contains no Acids or Bases - pH 6.1

Based on our award winning Evapo-Rust™ rust removing technology, Cooling System Flush allows the user to easily and quickly remove rust from automotive engines, mechanical cooling and recirculating systems, and liquid delivery lines without the need for dismantling.

Cooling System Flush uses the latest technology in rust and corrosion removal to totally revitalize automotive cooling systems.

Cooling System Flush removes rust scale, lime ( calcium ), and other deposits readily built up in radiators, water pumps, water jackets, engine blocks and heads. CSF will not harm soldered joints, gaskets or seals. Rust and corrosion in cooling systems act like an insulator and cause vehicles to overheat. This product restores the engines ability to transfer heat to the coolant allowing the engine to run cooler.


Photo Cooling System Flush Containers


DIRECTIONS: Remove Coolant and replace with cooling system flush. It is recommended that you should run the vehicle for at least 8 to 10 hours before draining Cooling System Flush. You may drive the vehicle normally during this period. Drain cooling system and flush with water. Refill cooling system with water and high quality coolant mixed to manufacturers specification. Rebottle CSF when drained as this product can be used over until completely spent ( Saturated ) Cooling System Flush is not recommended to be left in engine blocks when temperatures fall below 0ยบ degrees Celsius.

©2013 U.S. Procurements Ltd. All Rights Reserved. Terms / Privacy Policy